SWF
39 results
Learn how to access the Machine Function menu and switch the SWF control panel between flat and cap settings for proper setup.
Learn how the SWF embroidery machine start button can also be used for slow-speed jogging when sewing near a hoop or checking stitch alignment.
Learn how to use the Total Work Clear function to reset an embroidery machine's completed design counter back to zero.
Learn how to set x and y repeats, spacing, sewing priority, and jump or stop options when using an embroidery machine repeat button.
Learn how to set the embroidery machine backstitch unit so it backs up the correct number of stitches after a stop or thread break.
Learn how to set the embroidery machine backtack function for a lock stitch at the beginning, end, or both points of a design.
Learn what the default function does on an embroidery machine and how to use it to restore factory preset settings when advised.
Learn how to set the Jump Convert function so the machine converts consecutive jump stitches into a running stitch or trim.
Learn how to adjust maximum, minimum, jump, inching, and slow speed settings on an embroidery machine using the cursor, set button, and keypad.
Learn how to set the trim inching function so the machine slows properly, forms a lock stitch, and sets the correct trim length.
Learn the main settings button functions on an SWF embroidery machine, including scale, angle, and how to adjust X and Y design size.
Learn how to set trim length on an SWF embroidery machine to prevent thread pullout and visible tails on the front of embroidery.
Learn how to adjust the SWF trim start function so the machine either resumes sewing after a trim or stops for manual control.
Learn how to adjust the SWF control panel lock stitch setting to choose how many securing stitches are added at the start or end of a design.
Learn how to use the SWF control panel float function to move forward or backward through a design without sewing.
Learn how to use the frame button to move the pantograph, inspect stitching, and return the machine to the exact sewing position.
Learn how the SWF applique function controls stops on back-to-back color changes and when to set it to yes or no.
Learn how to adjust the SWF machine's Auto Back setting so the frame automatically backs up a set number of stitches after a thread break.
Learn how to turn the SWF embroidery machine Auto Color Change function on or off from the control panel and when to disable it.
Learn how to adjust the auto-jump function on an SWF embroidery machine and understand the 12.6 mm display quirk at the maximum setting.
Learn how to change the SWF machine Power Origin setting so the machine either returns to center after repowering or stays in place.
Learn how to enable or disable the SWF machine's auto trim setting using the control panel when the trimming mechanism needs adjustment.
Learn how to adjust the SWF control panel’s Trim Frame Move setting to control whether the frame shifts after trimming.
Learn what the SWF machine button controls, how its submenu works, and how to access the EMB function menu on the control panel.
Learn how to use the Total Stitch Clear function on the SWF control panel to reset the machine’s running total stitch count to zero.
Learn how the SWF embroidery machine start and stop buttons control sewing, stitch backup, floating, and inching speed operation.
Learn how the SWF control panel Previous button backs out of menu layers and returns the machine to the main sewing screen.
Learn how to adjust the SWF control panel stop inching setting so the machine places slow starting stitches before reaching full speed.
Learn how to use the SWF control panel needle button to assign design colors, insert or delete entries, and save needle changes correctly.
Learn how to use the SWF embroidery control panel's start stitch function to begin sewing from a specific stitch instead of stitch zero.
Learn how to adjust embroidery speed on an SWF machine before sewing starts and while the design is actively stitching.
Learn how to use the SWF embroidery machine angle function to rotate designs for hats, jackets, hoodies, and left chest placement.
Learn how to use the SWF embroidery machine trim button to make a manual trim with a lock stitch for cleaner, more secure thread cuts.
Learn how to read the LED information screen, including design details, stitch progress, work counters, speed, and needle position.
Learn how the embroidery machine offset button moves the frame to an alternate position to make applique placement easier.
Learn how to safely unpack, mount, and connect the SWF control panel on a 1501 embroidery machine before powering it on.
Learn how to use the SWF control panel Stitch Edit function to slow down difficult sections of a design and restore normal speed afterward.
Learn how to switch the SWF control panel from flat mode to cap mode so designs rotate correctly for proper hat embroidery.
Learn how to perform a quick color change on an SWF embroidery machine, reassign the correct needle, and return to the start of the color.