In this video, we show how to secure the machine to the workstation. Before beginning, we gather an adjustable wrench, the bolts that came with the workstation, and something sturdy enough to prop the machine up. We also note the four holes on the top of the workstation, since these are where the bolts will pass through to secure the machine.
We then enlist a partner to help lift the machine and insert the support underneath it. With the machine safely propped up, we use the adjustable wrench to loosen the temporary legs and completely remove all four of them.
After the legs are removed, we slightly lift the machine again with the help of a partner, remove the prop, and gently set the machine down over the four holes in the workstation. We then insert the bolts from underneath the shelf, up through the holes, and into the machine, and tighten them with the wrench.
Once you're set up, stock your shop with embroidery supplies at GPI Supplies.