In this video, we show how to connect the power supply for the Toyota ESP 9100. We note that the machine connects to a standard 110-volt electrical outlet and comes with its own surge protector. We also recommend using an uninterrupted power source with the machine for added protection.
First, we connect the power cable and feed it down through the two holes in the back of the workstation. Once that is done, we take the power source cable, which has the same connector on both ends, and plug one end into the power supply.
We then feed that cable down through the first hole in the workstation and connect it to the machine. This completes the basic power connection needed before powering the machine on.
For general Toyota setup essentials beyond cabling, see embroidery supplies.