Lubrication chart for BEDT-ZQ-501 (Elite Pro) machines

Osman Bayrak

The information in this article applies to the following product:

  • Barudan BEDT-ZQ-501 Elite Pro single head embroidery machine

SUMMARY

This document shows the locations and service intervals for lubricating the BEDT-ZQ-501 "Elite Pro" machine. This information has been updated since the first machine shipments.

 

BEDT-ZQ-501 (Elite Pro) LUBRICATION CHART

PART ID

LUBRICANT

FREQUENCY

A1  Rotating Hook  Barudan machine oil or 
Clear (mineral) oil for sewing machinery
Every 4 to 6 hours
B1  Drive Shaft Barudan machine oil or 
Clear (mineral) oil for sewing machinery

*Wipe lightly with cotton swab saturated in oil.

Once a week
B2 Hook Shaft Bushings (3) 
B3 *Needle Bars 
C1  Needle Bar Crank Rod Bearing oil Once a week
C2 Take-up Drive Lever 
C3 Needle Bar Drive Lever (2)
C4 Needle Bar Drive Links (3)
C5 Needle Bar Driving Shaft
E1 Take-Up Lever  Lithium grease spray Every 3 months
E2 Take-Up Lever Cam Groove
E3 Presser Foot Cams (2)
F1  Lower Connecting Gear  Wheel bearing grease 
(must remove right side head cover)
Every 6 months

Leave a comment

Please note, comments must be approved before they are published