The information in this article applies to the following product:

• Barudan BEDT-ZQ-501 Elite Pro single head embroidery machine

SUMMARY

This document shows the locations and service intervals for lubricating the BEDT-ZQ-501 "Elite Pro" machine. This information has been updated since the first machine shipments.

 

BEDT-ZQ-501 (Elite Pro) LUBRICATION CHART
PART ID		LUBRICANT	FREQUENCY
A1	Rotating Hook	Barudan machine oil or  Clear (mineral) oil for sewing machinery	Every 4 to 6 hours
B1	Drive Shaft	Barudan machine oil or  Clear (mineral) oil for sewing machinery *Wipe lightly with cotton swab saturated in oil.	Once a week
B2	Hook Shaft Bushings (3)
B3	*Needle Bars
C1	Needle Bar Crank Rod	Bearing oil	Once a week
C2	Take-up Drive Lever
C3	Needle Bar Drive Lever (2)
C4	Needle Bar Drive Links (3)
C5	Needle Bar Driving Shaft
E1	Take-Up Lever	Lithium grease spray	Every 3 months
E2	Take-Up Lever Cam Groove
E3	Presser Foot Cams (2)
F1	Lower Connecting Gear	Wheel bearing grease  (must remove right side head cover)	Every 6 months

 

Get all your Garment ink, parts and supplies at Garmentprinterink.com