The information in this article applies to the following product:
- Barudan BEDT-ZN-101 "Elite Jr" single head embroidery machine
SUMMARY
This document shows the locations and service intervals for lubricating the BEDT-ZN-101 "Elite Jr" machine. This information has been updated since the first machine shipments.
NOTE:
For easier printout and storage on a computer, this information is also available in an Adobe Acrobat file:
BEDT-ZN-101 (Elite Jr) LUBRICATION CHART
PART ID |
LUBRICANT |
FREQUENCY |
|
A1 | Rotating Hook | Barudan machine oil or Clear (mineral) oil for sewing machinery |
Every 4 to 6 hours |
B1 | Drive Shaft | Barudan machine oil or Clear (mineral) oil for sewing machinery *Wipe lightly with cotton swab saturated in oil. |
Once a week |
B2 | Hook Shaft Bushings (2) | ||
B3 | *Needle Bars | ||
C1 | Needle Bar Crank Rod | Bearing oil | Once a week |
C2 | Take-up Drive Lever | ||
C3 | Needle Bar Drive Lever | ||
C4 | Needle Bar Drive Links (2) | ||
C5 | Needle Bar Driving Block | ||
C6 | Needle Bar Driving Shaft | ||
E1 | Take-Up Lever | Lithium grease spray | Every 3 months |
E2 | Take-Up Lever Cam Groove | ||
E3 | Presser Foot Cams (2) | ||
F1 | Lower Connecting Gear | Wheel bearing grease (access by removing the left side head cover) |
Every 6 months |
Get all your Garment ink, parts and supplies at Garmentprinterink.com