What is an ERROR 100 (Main Shaft is not at the Fix Position) and how to clear it.
Reasons and Solutions:
A. IMPORTANT: Consult the Main Drive System pages of the Parts Manuel that came with your machine for further help with parts numbers.
On a 601c, 1201c and 1201 Machines:
1. Turn the Machine off
2. Spin the Hand Pulley in a counter clockwise direction until the number on the pulley reaches 100
3. Turn the Machine back on
On any other SWF machine:
1. Turn Machine off
2. Using a 6 mm Allen wrench screwdriver spin the Angle Plate on the left side of your machine until the Indicator points to 100
3. Turn the machine back on
Get all your Garment ink, parts and supplies at Garmentprinterink.com