THE EMC 10 WILL NOT POWER UP, THE DISPLAY IS BLANK:

1. Check the power source at the wall outlet.
2. Check the connectivity of the power cord.
3. Check the function of the Power Supply fan, if there
4. is no motion then check the fuse that are located behind the Power Supply off/on switch.
5. Check the Power Harness Connector and make sure that it is connected to the connector block of the Power Supply.
6. The connector can be removed to check if a load is keeping the Power Supply from functioning.
7. If the fuses are good and the fan is not functional then order a Power Supply from your distributor.

Get all your Garment ink, parts and supplies at Garmentprinterink.com