The SWF Machine Training DVD
(over 3.5 hours of training videos) is the best investment you
could make after the purchase of your new or used SWF embroidery machine (most certainly
if you purchased a USED SWF embroidery machine). Even if you have had your
SWF machine for a while and feel you know it, still consider it. This DVD
has over 3.5 hours of instruction that you can watch on your own time.
Fast forward, rewind, pause.......This is the best way to get the most out of your
investment. Just the detailed instruction on EVERY
function of the control panel is worth the money.....I guarantee you. I
have not had one disappointed customer yet.
In all the years of commercial and home
embroidery, there has never been a
comprehensive repair video for any brand
machine on the market. We all know that if
something goes wrong with our machine
(whether you are a small or large business)
it can mean hundreds to thousands of dollars
in repairs, lost business and time. Even if
you are under warranty, you may have to
wait for a service tech and it will cost you
a travel fee of at least $300. This TWO DVD
repair training set shows you, step by step,
how to repair most everything on your
machine for $99!! But don't wait until
something goes wrong ........buy this DVD
set to learn how to properly maintain your
machine - All Oiling points, all greasing
points, all cleaning point are filmed in
complete detail with the ability to pause,
rewind, fast-forward and watch over and over
again.
DVD Chapter List
FREE Embroidery Machine Operation Training Videos
LCD Control Panel
*New
* LCD control panel operation
* Buttons
* Screens
*
Function location
* Operation
* Loading a design
* Loading sequence
*
setting up colors
* orientation
* Centering the design
* Best practices
*
Design size
*
Tracing the design
EMBROIDERY BASICS
*
Threading your machine
* From scratch
*
Pull through method
* Removing the driver
* Attaching tubular arms for flats
* Calling a design
*
Assigning colors
* Centering the hoop
*
Tracing a design
* Standard trace
* Optimized trace
*
Tension tests (H,I,FOX) – adjusting
upper thread tension
* Understanding tensions
* I test
* FOX test
* Tension examples
* Adjusting bobbin tension
*
Proper operating speeds
* Quick color change
Hats
* Placement of the Gauge - mounting
* Attaching the driver
* Removing the driver
* Setting up the control panel
* Hooping a hat on the 270 frame
* Calling a design, centering, tracing on
the 270 frame
* Hooping a hat on the standard frame
* Connecting the standard hat frame to
the driver
* Calling a design, centering, tracing on
the standard frame
*
Hooping for front and side embroidery
* Sewing on front and side of hats
* Sewing on side of finished hat
* Hooping back of hat with standard
frame
* Sewing on back of hats with standard
frame
* Hooping back of hat with 9cm frame
* Adjusting the 270 cap frame
* Adjusting the standard cap frame
* Also included
*Hat preparation
* Design limits for 270 and
standard
* Design placement for 270
and standard