Installing the leveling bolts on a SWF 1501 embroidery machine

How do Install the Leveling Bolts on a commercial embroidery machine? The best way is to watch a training video like this on installing the Leveling Bolts on a commercial embroidery machine. Whether you have a Tajima, SWF, HAPPY or Toyota embroidery machines, they all have to be stabilized and leveled. If you are working in a basement or a garage like many embroiderers, you don't really need to be concerned about vibration as long as you level the machine properly. If you feel the floor is unstable than you can put 2x2's down with insulation and 3/4" plywood. You don't want to jeopardize the performance of the machine or the quality of the embroidery. The machine is very heavy and should hold steady to the floor, again, only if it is leveled properly.
Your noise level may be a little higher if your machine is on a raised floor but just make sure all the leveling feet are tight and that you used a level to ensure it's not off balance.

Embroidery Training Videos for Service, Repair and Business

Installing the Leveling Bolts on a SWF Embroidery Machine

What are some good tips on leveling and stabilizing my embroidery machine?
If you are working in a basement or a garage like many embroiderers, you don't really need to be concerned about vibration as long as you level the machine properly. If you feel the floor is unstable than you can put 2x2's down with insulation and 3/4" plywood. You don't want to jeopardize the performance of the machine or the quality of the embroidery. The machine is very heavy and should hold steady to the floor, again, only if it is leveled properly.
Your noise level may be a little higher if your machine is on a raised floor but just make sure all the leveling feet are tight and that you used a level to ensure it's not off balance
Greasing the rail, Oiling the Rotary Hook, Error 100, Removing the pressure foot, Rotary hook preparation, Your machine upon arrival, Attaching or changing the control panel, Putting on the leveling bolts, Assembling the light fixture, Placement of the table, Assembling the thread rack, Pull through method, Centering the hoop, Hooping for front and side embroidery, LED PANEL,Intro to the Edit button, Cleaning bobbin case, Oiling the rotary hook, SWF machine training videos, SWF Repair Training

Back to Home

SWF leveling bolts

Back to Chapter List

Installing the leveling bolts on a SWF 1501 Embroidery Machine

SWF Machine Training
DVD

SWF Repair Training
DVD set

Learn how to use your new or used SWF embroidery machine with this comprehensive, embroidery training video Learn how to Repair and Maintain your new or used SWF embroidery machine with this comprehensive training video

$99

$139

Lots of Free Videos Samples

Lots of Free Videos Samples

Fill out the form below
(for more information or to ask a question)

Email Address:

Question: