Greasing the rail on the Embroidery Machine Head

How do you grease rail on a commercial embroidery machine head? The best way is to watch a training video like this on greasing the rail on a commercial embroidery machine Head. Where can I get the proper grease for a commercial embroidery machine? Cleaning and lubricating your machine will go a long way toward keeping it running smoothly. But don’t wait to do it once a year. Most of the cleaning should be done once a week or more. If you’re sewing towels, you’ll have a much larger buildup of lint in your hook and bobbin case much more rapidly than other fabrics. The machines need oil to run properly; however, oil and dirt combined can make quite an abrasive. The maintenance procedure for greasing your Tajima, SWF, HAPPY, Melco and Toyota embroidery machine might be a little different, just make sure you make the time to do it.

Embroidery Training Videos for Service, Repair and Business

Greasing the Rail on the Embroidery Machine Head

What tools do I need to clean and lubricate my Embroidery Machine?
Tools and Supplies
• Your best embroidery machine-cleaning tool is an air compressor. Canned air is helpful, but an air compressor is the best. Make sure your air compressor filters out moisture; you don’t want to blow water into your machine.
• A Swiffer Duster (or similar product) is perfect for trapping and holding dust. These flexible dusters are great for getting into small, awkward places and best of all, the duster is disposable.
• A multipurpose spray cleaner, safe for plastics and metals.
• Paper towels, clean, lint-free rags, a small lint brush (one usually comes with an embroidery machine).
• A spray greaser/oil remover such as C-60 by Sprayway.
• Q-tips and rubbing alcohol.
• Tools, including assorted screwdrivers, wrenches, etc. tlbundy@basspro.com
Greasing the rail, Oiling the Rotary Hook, Error 100, Removing the pressure foot, Rotary hook preparation, Your machine upon arrival, Attaching or changing the control panel, Putting on the leveling bolts, Assembling the light fixture, Placement of the table, Assembling the thread rack, Pull through method, Centering the hoop, Hooping for front and side embroidery, LED PANEL,Intro to the Edit button, Cleaning bobbin case, Oiling the rotary hook, SWF machine training videos, SWF Repair Training

Back to Home

Greasing the rail

Back to Chapter List

SWF 601C/1501/1501C/1502/1504/1204/1506
Greasing the rail on a SWF Embroidery Head

SWF Machine Training
DVD

SWF Repair Training
DVD set

Learn how to use your new or used SWF embroidery machine with this comprehensive, embroidery training video Learn how to Repair and Maintain your new or used SWF embroidery machine with this comprehensive training video

$99

$139

Lots of Free Videos Samples

Lots of Free Videos Samples

Fill out the form below
(for more information or to ask a question)

Email Address:

Question: